Click on the image to check the artwork
Product name: ACCELERATOR MBTS(DM)
Chemical name: Dibenzothiazole disulfide
CAS No.: 120-78-5
Structure:
Specification:
Item |
Powder |
Oil powder |
Granular |
Appearance |
Pale yellow or white powder |
Pale yellow or white powder |
Pale yellow or white powder |
Initial M.P. (Min) ≥ °C |
165 |
165 |
165 |
Loss on drying (Max) ≤ % |
0.40 |
0.40 |
0.40 |
Ash (Max) ≤ % |
0.30 |
0.30 |
0.30 |
Residue on 100mesh sieve (Max) ≤ % |
0.5 |
- |
- |
Granular diameter mm |
- |
- |
1.5-3 |
Broken strength N |
- |
- |
2-5 |
Oil content % |
- |
1.0-2.0 |
- |
Properties:
A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol.
Application:
Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticizer and/or retarder in polychloroethylene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT.
Packing: In 25kgs bag.
Storage: Keep container tightly closed in a cool, well-ventilated place.
http://www.dljcchem.com/